Matco Norca Iron & Bronze Valves

Bay Port Valve & Fitting is an authorized distributor of Matco iron and bronze valves. Their iron and bronze valve line includes gate, globe, and check valves with threaded, flanged, mechanical joint and gasketed ends. Pressure ratings available are 125#, 150#, 200#, 250# and 300#, and valves meeting AWWA requirements.

Bronze & Brass Gate Valves
	*Matco# 514 gate valve* ISO-9002 • 200 WOG - 125 SWP • Full Port • Cast Brass • Non-rising Stem • Threaded Bonnet • Threaded Ends Conform to ANSI Standards B2.1 • Solder Ends Conform to ANSI Standards B16.18 • Complies w/ NSF-61for Low Lead • Valves are Tested in Accordance w/ MSS-SP-82 • Sizes 1/4"- 4"
	*Matco# 511 gate valve* ISO-9002 • 300 WOG - 150 SWP • Bronze • Full Port • Non-rising Stem • Federal Spec 54 Class A Type 1 • Threaded Ends Comply to ANSI Standards B2.1 • Valves Conform to MSS-SP-80 • Sizes 1/4"- 3"
	*Matco# 512 gate valve* ISO-9002 • 300 WOG - 150 SWP • Bronze • Full Port • Rising Stem • Federal Spec 54 Class A Type 2 • Threaded Ends Comply to ANSI Standards B2.1 • Valves Conform to MSS-SP-80 • Sizes 1/4" - 3"
	*Matco# 518 gate valve* ISO-9002 • 150 WOG • Cast Brass • Non-rising Stem • Compact Design • Threaded Bonnet • Threaded Ends Comply to ANSI Standards B2.1 • Solder Ends Comply to ANSI Standards B16.18 • Sizes 1/2"- 2"
	*Matco# 503 gate valve* ISO-9002 • 300 WOG - 150 SWP • Bronze Body 85/5/5/5 • Full Port • Non-rising Stem • Threaded Bonnet • Threaded Ends Comply to ANSI Standards B2.1 • Valves are Tested in Accordance with MSS-SP-82 • Sizes 1/2"- 4"
	*Matco# 519* ISO-9002 • 200 WOG - 125 SWP • Cast Brass • Full Port • Compression Ends • Non-rising Stems • Valves are Tested in Accordance with MSS-SP-82 • Sizes 1/2" - 1"
	*Matco# 517 gate valve* ISO-9002 • 200 WOG - 125 SWP • Cast Brass • Drainable Body • Non-rising Stem • Threaded Ends Comply to ANSI Standards B2.1 • Solder Ends Comply to ANSI Standards B16.18 • Valves are Tested in Accordance with MSS-SP-82 • Sizes 1/2" - 1"
	*Matco# 730 quick opening gate valve* ISO-9002 • 200 WOG • Bronze Body • Quick Opening • Lever Handle • Split Wedge Disc • Threaded Ends Comply to ANSI Standards B2.1 • Sizes 1/2" - 4"
Brass Swing Check Valves
	*Matco# 521 brass swing check valve* ISO-9002 • 200 WOG-125 SWP • Cast Brass Body • Swing Type • Integral Seat • Threaded Ends Comply with ANSI B2.1 3/8"- 4" • Solder Ends Comply with ANSI B16.18 1/2"- 2" • Valves are Tested in Accordance w/MSS-SP-82
Resilient Wedge Cast Iron Gate Valves
	*Matco# 10RS gate valve* ISO-9002 • Gate Valve-Threaded • 200 CWP-Max. Temp. 140 Deg. F. • C.I. Body • Resilient Wedge • Non Rising 304 S.S. Stem • Full Port Flow • Epoxy Coating • ASTM A126 Class B • Threaded Ends Confom to ANSI B1.20.1 • Sizes 2"- 8"
	*Matco# 10RW gate valve* ISO-9002 • Gate Valve-Flanged Ends • 200 CWP-Max. Temp. 140 Deg. F. • C.I. Body w/3 Bosses w/1 Tapped & Plugged • Resilient Wedge • Non Rising 304 S.S. Stem • Full Port Flow • Epoxy Coating • ASTM A126 Class B • Flanged Ends Conform with ANSI B16.1 • Sizes 2"- 8"
	*Matco# 100M gate valve* ISO-9002 • Gate Valve-Mechanical Joint • 200 CWP-Max Temp. 140 Deg. F. • 3 Bosses w/1 Tapped & Plugged • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising Bronze Stem • Full Port Flow • Supplied with Operating Nut • AWWA C-509 Approved • Mechanical Joint Ends Conform with AWWA C111/A21.11 • Sizes 3"- 16"
	*Matco# 10RT gate valve* ISO-9002 • Gate Valve-Ring Tite Gasket Ends • 200 CWP-Max. Temp. 140 Deg. F. • C.I. Body w/3 Bosses w/1 Tapped & Plugged • Resilient Wedge • Non Rising 304 S.S. Stem • Full Port Flow • Supplied with Operating Nut • Epoxy Coating • ASTM A126 Class B • Gasketed Ends for (IPS) PVC O.D. Pipe • Sizes 2"- 8"
	*Matco# 12RW gate valve* • ISO-9002 • Gate Valve-Flanged Ends • 200 CWP • 3 Bosses w/1 Tapped & Plugged • Epoxy Coating • Resilient Wedge • Rising 304 S.S. Stem • Full Port Flow • Flanged Ends Conform with ANSI B16.1 • Sizes 3"- 8"
	*Matco# 100RW gate valve* ISO-9002 • Gate Valve-Flanged Ends • 200 CWP-Max Temp. 140 Deg. F. • 3 Bosses w/1 Tapped & Plugged • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising Bronze Stem • Full Port Flow • Supplied with Handwheel or Operating Nut • AWWA C-509 Approved • Flanged Ends Conform with ANSI B16.1 • Sizes 2"- 16"
	*Matco# 200M gate valve* ISO-9002 • Gate Valve-Mechanical Joint Ends • 200 CWP-Max. Temp. 140 Deg. F. • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising 304 S.S. Stem • 321 S.S. Bonnet & Operating Nut Bolts • Supplied with 2" Square Operating Nut • AWWA C-509 Approved • Mechanical Joint Ends Conform with AWWA C111/A21.11 • Sizes 3" - 12"
	*Matco# 200FJ gate valve* ISO-9002 • Gate Valve-Flanged x Mechanical Joint Ends • 200 CWP-Max. Temp. 140 Deg. F. • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising 304 S.S. Stem • 321 S.S. Bonnet & Operating Nut Bolts • Supplied with Handwheel or Operating Nut • AWWA C-509 Approved • Flanged End Conforms with ANSI B16.1 • Mechanical Joint End Conforms with AWWA C111/A21.11 • Sizes 3" - 12"
	*Matco# 105U gate valve* • ISO-9002 • Gate Valve-Flanged Ends • 175 CWP-Max. Temp. 140 Deg. F. • U.L. Listed / F.M. Approved • N.Y.C. Approved (MEA257) • 3 Bosses w/1 Tapped and Plugged • Fusion Bonded Epoxy Coating • Outside Screw & Yoke Rising Stem • Resilient Wedge • Sizes 2-1/2" - 12"
	*Matco# 200W gate valve* • ISO-9002 • Gate Valve-Flanged Ends • 200 CWP-Max. Temp. 140 Deg. F. • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising 304 S.S. Stem • 321 S.S. Bonnet & Operating Nut Bolts • Handwheel Standard or Operating Nut Optional • AWWA C-509 Approved • Flanged Ends Conform with ANSI B16.1 • Sizes 2" - 12"
	*Matco# 100RT gate valve* • ISO-9002 • Gate Valve-Ring Tite Gasket Ends • 200 CWP-Max. Temp. 140 Deg. F. • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising 304 S.S. Stem • 321 S.S. Bonnet & Operating Nut Bolts • Supplied with 2" Square Operating Nut • AWWA C-509 Approved • Gasketed Ends for (IPS) PVC O.D. Pipe • Sizes 3" - 8"
	*Matco# 105W gate valve* • ISO-9002 • Gate Valve-Flanged Ends • 200 CWP-Max. Temp. 140 Deg. F. • 3 Bosses w/1 Tapped and Plugged • Fusion Bonded Epoxy Coating • Outside Screw & Yoke Rising Stem • Resilient Wedge • AWWA C-509 Approved • Sizes 3" - 16"
IBBM Cast Iron Gate Valves
	*Matco# 100F gate valve* • ISO-9002 • Gate Valve-Flanged Ends • 200 WOG-125 WSP • Iron Body, Bronze Mounted (IBBM) • 3 Bossings for Tapping • Bolted Bonnet • Non Rising Bronze Stem • Solid Wedge • Conforms to MSS-SP70 • Flanged Ends Conform with ANSI B16.1 • Epoxy Coating • Sizes 2"-24"
	*Matco# 105F gate valve* • ISO-9002 • Gate Valve-Flanged Ends • 200 WOG-125 WSP • Iron Body, Bronze Mounted (IBBM) • 3 Bossings for Tapping • Bolted Bonnet • Outside Screw & Yoke Rising Stem • Solid Wedge • Conforms to MSS-SP70 • Flanged Ends Conform with ANSI B16.1 • Epoxy Coating • Sizes 2"- 24"
	*Matco# 200F gate valve* • Gate Valve-Flanged Ends • 200 WOG-125 WSP • Iron Body, Bronze Mounted (IBBM) • Bolted Bonnet • Non Rising Stem • Solid Wedge • Conforms to MSS-SP70 • Flanged Ends Conform with ANSI B16.1 • Sizes 2 1/2"- 12"
	*Matco# 100S gate valve* • ISO-9002 • Gate Valve-Threaded Ends • 200 WOG-125 WSP • Iron Body, Bronze Mounted (IBBM) • Bolted Bonnet • Non Rising Bronze Stem • Solid Wedge • Conforms to MSS-SP70 • Threaded Ends Conform to ANSI B1.20.1 • Epoxy Coating • Sizes 2"- 8"
	*Matco# 105S gate valve* • ISO-9002 • Gate Valve-Threaded Ends • 200 WOG-125 WSP • Iron Body, Bronze Mounted (IBBM) • Bolted Bonnet • Outside Screw & Yoke Rising Stem • Solid Wedge • Conforms to MSS-SP70 • Threaded Ends Conform to ANSI B1.20.1 • Epoxy Coating • Sizes 2"- 8"
	*Matco# 205F gate valve* • Gate Valve-Flanged Ends • 200 WOG-125 WSP • Iron Body, Bronze Mounted (IBBM) • Bolted Bonnet • Outside Screw & Yoke Rising Stem • Solid Wedge • Conforms to MSS-SP70 • Flanged Ends Conform with ANSI B16.1 • Sizes 2"- 10"
Cast Iron Globe Valve
	*Matco# 150F globe valve* • Globe Valve-Flanged Ends • 200 WOG - 125 SWP • Cast Iron Body • Epoxy Coating • Bolted Bonnet • Outside Screw & Yoke Rising Stem • Cast Bronze Disc & Seat • MSS-SP-85 Conformance • Flanged Ends Conform with ANSI B16.1 • Sizes 2"- 12"
Ductile Iron Valves
	*Matco# 200WD gate valve* • ISO-9002 • Gate Valve-Flanged Ends • 250 CWP • Ductile Iron Body • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising 304 S.S. Stem • Bolted Bonnet • 321 S.S. Bonnet & Operating Nut Bolts • Handwheel or Operating Nut • AWWA C-515 Approved • Flanged Ends Conform with ANSI B16.1 • Sizes 2"- 12"
	*Matco# 200MD gate valve* • ISO-9002 • Gate Valve-Mechanical Joint Ends • 250 CWP • Ductile Iron Body • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising 304 S.S. Stem • Bolted Bonnet • 321 S.S. Bonnet & Operating Nut Bolts • Supplied with Operating Nut • AWWA C-515 Approved • Mechanical Joint Ends Conform with AWWA C111/A21.11 • Sizes 2"- 12"
	*Matco# 200RTD gate valve* • ISO-9002 • Gate Valve-Ring-Tite Ends • 250 CWP • Ductile Iron Body • Fusion Bonded Epoxy Coating • Resilient Wedge • Non Rising 304 S.S. Stem • Bolted Bonnet • 321 S.S. Bonnet & Operating Nut Bolts • Operating Nut • AWWA C-515 Approved • Gasketed Ends for (IPS) PVC O.D. Pipe • Sizes 2"- 12"
Cast Iron Check Valves
	*Matco# 120F check valve* • ISO-9002 • Check Valve-Flanged Ends • 200 CWP • C.I. Body w / 1 Boss • Resilient Seat • Epoxy Coating • Bolted Cover • Conforms to MSS-SP-71 • Flanged Ends Conform with ANSI B16.1 • Sizes 2"- 12"
	*Matco# 120S UL/FM check valve* • ISO-9002 • Check Valve-Threaded Ends • 200 CWP • Resilient Seat • Epoxy Coating • Bolted Cover • Conforms to MSS-SP-71 • Threaded Ends Conform to ANSI / ASME B1.20.1 • Sizes 2"- 8"
	*Matco# 120U check valve* • ISO-9002 • Check Valve-Flanged Ends • 175 CWP • U.L. Listed / F.M. Approved • N.Y.C. Approved (MEA257) • C.I. Body w/1 Boss & Drain Plug on Bottom • Fusion Bonded Epoxy Coating • Bolted Cover with Lifting Eye • Resilient Seat • Flanged Ends Conform with ANSI B16.1 • Sizes 2 1/2"- 12"
	*Matco# 120SS check valve* • ISO-9002 • Check Valves-Threaded Ends • 200 CWP • C.I. Body with Outside Lever & Spring • Resilient Seat • Epoxy Coating • Bolted Cover • Conforms to MSS-SP-71 • Threaded Ends Conform to ANSI / ASME B1.20.1 • Sizes 3" and 4" Only
	*Matco# 120W check valve* • ISO-9002 • Check Valve-Flanged Ends • 200 CWP • C.I. Body w/1 Boss • Resilient Seat • Fusion Bonded Epoxy Coating • Bolted Cover • AWWA C-508 Approved • Flanged Ends Conform with ANSI B16.1 • Sizes 3"- 12"
	*Matco# 120WC check valve* • ISO-9002 • Check Valve-Flanged Ends • 200 CWP • C.I. Body with Outside Lever & Weight • 1 Boss • Resilient Seat • Fusion Bonded Epoxy Coating • Bolted Cover • Spring Kit Adder Also Available • AWWA C-508 Approved • Flanged Ends Conform with ANSI B16.1 • Sizes 3"- 16"
	*Matco# 115F check valve* • ISO-9002 • Check Valve-Flanged Ends • 200 WOG-125 WSP • C.I. Body, Bronze Mounted (IBBM) Seat • One Boss • Epoxy Coating • Bolted Bonnet • Conforms with MSS-SP-71 • Flanged Ends Conform with ANSI B16.1 • Sizes 2"- 12"
	*Matco# 115S check valve* • ISO-9002 • Check Valve-Threaded Ends • 200 WOG-125 WSP • C.I. Body, Bronze Mounted (IBBM) Seat • Epoxy Coating • Bolted Bonnet • Conforms with MSS-SP-71 • Threaded Ends Conform to ANSI / ASME B1.20.1 • Sizes 2"- 8"

Link to Matco Norca website

Phone (863) 425-0023 Fax (863) 425-5091

Home / Products/ Services / Manufacturers / Technical / Contact Us